Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Marquee Ampersand

Browe Project Categories
Designed by Make It Fun Crafts
| More

Materials:92080 JoAnns Sheet Project Images

FloraCraft® Make It: Fun® Foam:
Sheet: 1”x12”x36”

Other Materials:
Battery Operated String Lights: 15 Bulb Count
Acrylic Paint: Orange and White

Make It: Fun® StyroCutter Plus
Wood Dowel: 3/16” Diameter
Low-Temp Glue Gun, Glue Sticks
Paint Brushes
Black Marker



  1. Print the template and cut it out. Pin the template to the foam sheet.  Following the packaging instructions, carefully use the StyroCutter® Plus to cut out two ampersands from the foam sheet.  Be sure to hold the cutter blade at a 90 degree angle to the top of the foam sheet to keep a straight edge.  Use a scrap piece of foam to lightly sand any uneven edges.
  2. Mark 15 holes, evenly spaced, around the backside of one of the foam ampersands using a black marker. Use the wood dowel to pierce the holes through the foam where marked.
  3. Cut a ½” wide channel through the center of the second foam ampersand using the StyroCutter® Plus. This channel is where you will hide the cords and battery pack from the string lights.  Mark the channel with a black marker.  Do not cut too close to the edges.  Be sure to leave at least 3/8” of foam around the outer edge of the ampersand.
  4. Glue the two ampersands together. Be careful not to get glue into the pierced holes.  Paint the ampersand orange and let dry completely.  Dry brush on white paint to give an aged or weathered look.
  5. Insert the lights into the holes through the back of the shape. Use the dowel to carefully guide the lights into place as needed.  Tuck the cord and battery pack into the channel and secure with a U-shaped floral pin if necessary.

Ampersand Template


Skill Level: Intermediate


Post a Comment

Your email is never shared. Required fields are marked *