Winter Tree Tablescape

Skill Level: Beginner

Write a Review

| More

Supplies

  • FloraCraft® CraftFōM®:
    • Cones:
      • 3 7/8" x 11 7/8" - White
      • (2) 3 7/8" x 9 7/8" - White
  • Faux Snow
  • Silver, oval serving tray, approx. 10" x 14"
  • Ball Ornaments:
    • (9) 1 1/4" Shiny Silver
    • (7) 1 1/4" Satin Silver
    • (4) 2 1/2" Glass Frosted Swirl Design
    • 3/4" Silver Plastic Snowflakes 

Tools

  • Floral Shears
  • Spray Adhesive
  • Large Paper Plate
  • Old Newspapers
  • Large Cardboard Box
  • Glue Gun and Glue Sticks

Instructions

  1. Pour some Winter Snow onto a paper plate. In a well-ventilated, newspaper-covered area (inside a cardboard box), spray all around the sides of one Foam Cone with spray adhesive. Holding Cone at top and bottom, roll Cone into Snow on a plate. Press firmly enough to adhere. Place Cone in spraying box and repeat process for the second layer. If any areas are left uncovered by Snow, repeat a third time. Let dry.
  2. Repeat process with other two Cones. Let trees dry.
  3. Use the tip of Floral Shears to carefully make small holes in the tops of threes. Hot glue tops of shiny silver ornaments into holes. Refer to photo to randomly place and hot glue silver snowflakes onto trees. (Note: If snowflakes tend to fall off along with Snow, carefully remove Snow where snowflakes will go, then glue snowflakes more directly onto Foam Cone.)
  4. Arrange trees on a silver tray and scatter ornaments around them. (Optional: Scatter Winter Snow first at the base of trees and then set ornaments in Snow.)

Leave a review or ask a question