Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Spiral Snowman and Tree

Browe Project Categories
Designed by Make It Fun Crafts
| More

Materials: SpiralSnowman&Tree

FloraCraft® Make It: Fun® Foam:
Discs: (2) 3”x 1”
Balls: (2) 2”
Sheet: 12”x 12” x ½”
Cone: 9”

Other Materials:
(2) 6.5ft. Jumbo Chenille Stem: White
Acrylic Paint: White
Iridescent Fine Glitter
Thin Wood Dowels: 10” and 6” Lengths
Rosette Fabric Trim: White/Black Polka Dot
Tiny Black Eyes
Tiny Pompom: White
Thin Wire: Black

Tools:
Low-Temp Glue Gun
Serrated Knife

INSTRUCTIONS:

  1. Draw a small star shape, about 2.5”, onto the ½” foam sheet. Use the knife to cut out the star shape.
  2. Roll one 2” ball firmly back and forth on the table to create a barrel shape for the hat. Paint the hat, the 2” ball head, the two discs, the star and the wood dowels white. Paint them one at a time and while they are still wet sprinkle each part with glitter. The paint will secure the glitter in place as it dries.
  3. Insert the wood dowels into the middle of the discs. Glue to secure in place. Glue the star to the top of the 6” dowel and glue the 2” head to the top of the 10” dowel.
  4. Double the chenille stem and twist it together to create one thick 3 ft. piece of stem. Spiral the stem around the 9” cone to form the shape. Place the chenille spiral over the 10” dowel. Glue the top of the spiral to the top of the dowel under the head. Secure the bottom of the dowel at the back of the disc.
  5. Cut the second chenille stem in half. Double the chenille stem and twist it together to create one 18” length. Spiral the stem around the cone as before to create the shape. Place the chenille spiral over the 6” dowel. Glue in place under the star. Glue the bottom of the spiral to the top back of the disc.
  6. Cut a piece of fabric trim to glue around the disc of the tree and around the neck of the snowman.
  7. Cut a length of chenille stem to glue around the base of the hat. Glue the hat in place on top of the head.
  8. Glue the eyes and the pompom nose in place. Bend a squiggle in a length of wire for the mouth. Bend the ends of the mouth inward toward the face. Insert the ends of the wire into the face and secure with glue.

Post a Comment

Your email is never shared. Required fields are marked *

*
*