Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Spiders & Spider Den

Browe Project Categories
Designed by Make It Fun Crafts
| More

Supplies

FloraCraft® Foam:
Extruded Wreaths, white: (2) 8” and (2) 14”
Balls: (8) 1”, 4”, 5”, 6” and (2) 8”

Other Materials:
Design It:® Simple Style® Decorative Mesh: White
Floral Pins
Acrylic Paint: Black
Ribbon: 1.5” Sheer Black
Chenille Stems: Black
Feather Boa: Black
Craft Eyes: (8) Black, Assorted Sizes
Craft Batting
Cheesecloth
Craft Sticks

Tools:
Make It: Fun® Foam Cutter or Serrated Knife
Low-Temp Glue Gun
Scissors

Instructions

  1. To create the spiral den, cut each wreath in half using the foam cutter or serrated knife.  Attach the ends of the half wreaths together in a spiral pattern.  Insert a craft stick into the end of each wreath before gluing them together for a secure hold.  Use the four 8” half wreaths for the top of the spiral and then attach the four 14” half wreaths spiraling to the bottom.
  2. Gather the end of the mesh and pin it to the end of the 8” wreath at the top of the spiral.  Tightly wrap the mesh around the wreaths to completely cover the spiral.  Cut the mesh and pin the end again at the bottom.  Pin the black sheer ribbon at the top of the den and spiral it around the wreaths, pinning again at the bottom.
  3. To create the hanging cocoons, cover an 8”, 6”, and 4” ball with craft batting, gluing to secure in place.  Cut strips of cheesecloth and loosely wrap each ball leaving some of the batting exposed.   Cut strips of cheesecloth and glue and pin to the tops of the balls for hangers.  Hang the largest ball from the bottom of the spiral with pins.  Hang the 6” ball in the center of the spiral and the 4” ball from the top of the spiral.
  4. To create the large spider, cut the 8” and the 5” balls in half. Use the other half of each ball to create a second spider or reserve for a future project. Shape the head and body of the spider into ovals by pressing the foam on a hard surface. Continue shaping until your spider has the look you desire. Glue the head to the body. Insert a craft stick into the back of the head before attaching to the body for a secure hold.  Paint the balls black and set aside to dry.
  5. Twist two chenille stems together for each of the eight legs. Cut 14” lengths of feather boa for each leg. Cut 24 pieces of 1.5” stem to use as ties. Secure one end of the boa to the leg about 1” up from one end. About half way down the leg secure the boa again; this is where the leg bends. The boa will be slightly longer than the end of the stem. Loop the boa and secure the loop to the end of the stem. This creates a fuzzy foot. Repeat this step for each leg. Secure the stem from each leg into the body just behind the neck (4 on each side).
  6. Cut two 3” pieces of chenille stem. Fold each piece in half and twist the ends together. Shape a slight bend in each and glue into the front of the face for the pinchers. Glue four eyes on each side of the head just above the pinchers, as shown.
  7. To create the small spiders, paint a 1” ball black and let dry.  Cut a chenille stem in half and fold each half in half again.  Glue the folded ends of each half stem into the 1” ball, two on each side to create eight legs.

Post a Comment

Your email is never shared. Required fields are marked *

*
*