Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Spider Web String Art

Browe Project Categories
Designed by Make It Fun Crafts
| More

Materials: 

Halloween 16 Phoography

FloraCraft® Make It: Fun® Foam:
Sheet: 1”x 12”x 24”

Other Materials:
(28”x 16”) Felt: White
Thin Elastic Jeweler’s Cord: Gold
Sequin Pins: Gold
Thin Gold Jeweler’s Wire
Pearls: 1” and ¾”

Tools:
Low-Temp Glue Gun
Scissors
Wire Cutters
Ruler
Black Marker

PDF Spider Web Template:

Instructions:

  1. Center the foam sheet onto the felt. Glue the felt around the foam sheet folding neatly at the corners.
  2. Print and use the template as a guide to insert your pins into the foam.
  3. Tie the end of the gold cord tightly to the corner pin at the top and trim off excess. Wrap the cord around the pins across the top row.  Be sure to wrap from pin to pin in the same direction to keep the string running straight along the pins.  When you reach the end of the row turn around and string back up the row.  In this direction, wrap the string around the opposite side of the pin to give a chain link appearance.  Tie the end of the cord to the corner pin to secure in place.  Repeat this step to string all five rows of pins in the same way.
  4. Create the connecting strings of the web. The corner pin is pin #1 for each of the five rows of pins.  Tie the end of the string to pin #2 at the right side of the board.  String along the five #2 pins wrapping in the same direction.  Turn around at the #2 pin at the top of the board and wrap in the opposite direction.  Tie off the cord back at the #2 pin at the right side of the board.  Continue stringing in this same way across the #3 pins, the #4 pins and so on to the #18 pin.
  5. Glue a length of gold wire through the pearls connecting them together.  Draw eyes with black marker onto the smaller pearl.  Cut four 4” lengths of wire for the legs and bind them together with a small length of wire.  Bend and shape the legs and trim to size.  Glue the legs centered under the pearls.  Shape a small length of wire into pinchers and glue them into the hole in the center of the pearl.  String a 9” length of cord from the web as shown to hang the spider from.  Glue the spider in place at the end of the string.

 

floracraft_37534234655 floracraft_37534236618 floracraft_37534240378 floracraft_37534238186 floracraft_37534242784

Post a Comment

Your email is never shared. Required fields are marked *

*
*