Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Snowflake String Art

Browe Project Categories
Designed by Make It Fun Crafts
| More

Materials: SnowFlake Wall Art

FloraCraft® Make It: Fun® Foam:
Sheets: (3) 1”x 12”x 12”

Other Materials:
1 Yd. Velvet Fabric: Blue
Metallic Yarn: Silver/White
Sequin Pins: 1”

Tools:
Low-Temp Glue Gun
Scissors
Serrated Knife
Black Marker
Ruler

Snowflake Template 1
Snowflake Template 2

 

INSTRUCTIONS:

  1. Measure 3.5” in from each corner of the foam sheets and make a mark. Draw a line across each corner at the marks. Use the serrated knife to cut the corners off evenly.
  2. Cut three 16” squares of velvet fabric. Lay the fabric face side down and lay the foam in the center. Pull the edges of the fabric up over the foam and glue in place at the back. Fold the corners neatly for a clean look. For a uniform look be sure that the nap of the velvet runs the same direction across all three panels.
  3. Begin pushing the pins into the foam as indicated on the templates. Use a ruler as a guide to keep the pins running straight and evenly spaced.
  4. Tie the end of the yarn to a center pin. Wrap the yarn around each pin from one to the next up the row of pins. Follow the template as indicated to create the pattern. When you reach the end pin, turn back and follow the pins back down the row. Wrap the yarn around the center pin at the next row and wrap the yarn around the pins to the end and back. Repeat to string all three panels.

 

Holiday 16 Photography

Holiday 16 Photography

Holiday 16 Photography

Holiday 16 Photography

Post a Comment

Your email is never shared. Required fields are marked *

*
*