Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Kids’ Table Gobbler

Browe Project Categories
Designed by Make It Fun Crafts
| More


  • FloraCraft® Brand Products:
  • STYROFOAM™ Brand Foam:
  • 2 Discs, 11 7/8″ x 15/16″
  • 2 Discs, 5 7/8″ x 1 3/16″
  • Design It:®  Foam Cutter
  • Hickory Home Décor Stain (Design Master®)
  • Olive Bright Color Tool® Spray Color (Design Master®)
  • Yellow Color Tool® Spray Color (Design Master®)
  • Plastic cutlery in: orange, green, red and yellow
  • 1 Orange beverage napkin
  • 2 – 40mm wiggle eyes
  • 1 Green paper cup
  • 2 White-plastic serving forks
  • Glue gun and glue sticks
  • Scissors
  • 3 Toothpicks
  • Ruler
  • Newspapers
  1. To make a flat surface, use foam cutter to trim 1″ x 6″ length off edge of each large disc.
  2. In a well-ventilated area, protect work area with newspapers. Spray both large discs and one small disc with Hickory stain. Spray all sides and edges. Let dry. On one side of each large disc and one small disc darken edges by spraying a second layer of paint. Let dry. Spray remaining small disc Olive Bright. Let dry. Align cut edges and glue large discs together (with darkened edges to the outside) by placing glue into center of discs only. (Note: By leaving outside unglued, cutlery will easily slip in and out.)
  3. For base, measure and lightly mark a guideline with a pencil at center of green disc. Cut three toothpicks in half and insert cut end into pencil line, evenly spaced apart. For turkey body, apply glue to cut edge of large disc unit and insert onto toothpicks.
  4. For feet, cut serving forks in half. Discard handles. Spray with yellow paint. Let dry. Then push short handle approx. 1″ into base, close to turkey.
  5. For head, glue small brown disc to bottom front of turkey. For turkey beak, diagonally fold napkin in half. Glue folded edge to center of face. Then glue wiggle eyes close to beak. Cut paper cup in half, apply glue and attach at an angle to top of turkey’s head.
  6. For “cutlery feathers” plan color order of 13 pair of cutlery on work surface. Starting at top center of disc body, carefully insert cutlery to create fanned feathers.  (Note: Turkey may be used year after year if children use a little care in removing cutlery. Simply replace cutlery the next year.)

One Comment

  1. Posted November 3, 2011 at 7:55 pm

    Just stopping by to let you know that I have featured your project on Fun Family Crafts! You can see it here

    If you have other kid friendly crafts, I’d love it if you would submit them 🙂 If you would like to display a featured button on your site, you can grab one from the right side bar of your post above.

Post a Comment

Your email is never shared. Required fields are marked *