Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Harvest Owl

Browe Project Categories
Designed by Make It Fun Crafts
| More

Materials:  Harvest Owl

FloraCraft® Make It: Fun® Foam:
Discs: 8” and 10”

Other Materials:
Feather Boas: (2) Brown/Multi and (1) White
White Faux Fur: (9”x 4”)
(2) Large Silk Mums: White
Black Witch Hat: (6”)
(2) Orange Buttons: (1.5”)
(2) Black Half Round Eyes: 25mm
Acrylic Paint: Orange/Yellow
Sequin Pins: ¾”

Low-Temp Glue Gun
Serrated Knife

Owl Template


  1. Cut out the face template and pin it to the 8” disc. Use the knife to cut out the template from the foam.  Cut a small flat spot off one side of the 10” disc, this is the bottom of the body.  Glue the head to the front of the body slightly tilted to one side.
  2. Glue the orange buttons into the center of the mums. Glue the black eyes into the center of the orange buttons.  Glue the mums snug against the foam, centered side by side on the face.
  3. Use the knife to cut the beak and the feet templates from the scrap piece of foam. Use scrap pieces of foam as sanding blocks to “sand” the edges of the beak and feet smooth.  Paint the parts orange/yellow and let dry.  Glue the beak to the face centered below the eyes.  Glue the feet to the front of the body about 1” apart.
  4. Pin the faux fur centered down the front of the body draping over the feet.  Pin a length of white boa outlining the owl’s eyes and under the beak.  Pin lengths of brown boa to cover each side of the body and the top and sides of the head.  Pin two small loops of white boa in a “V” shape to the top of the head for the owl’s horns.  Pin the hat to the head.


floracraft_37534252122 floracraft_37534258113 floracraft_37534254559 floracraft_37534256637 floracraft_37534262739 floracraft_37534260483

Post a Comment

Your email is never shared. Required fields are marked *