“Believe”

Skill Level: Beginner

Write a Review

| More

Supplies

  • FloraCraft® CraftFōM®:
    • (5) 5” Cubes - White
  • Burlap - Red
  • Jute Twine
  • Kraft Paper Roll or Recycled Paper Bags
  • Acrylic Paint - White
  • Polka Dot Ribbon - Red/White
  • Jingle Bells:
    • Green
      Red
  • Faux Pine Branches
  • Heavy Card Stock

Tools

  • Foam Cutter or Serrated Knife
  • Low-Temp Glue Gun
  • Scissors
  • Stencil Brush
  • Wire Cutters
  • Craft Knife
  • Cutting Mat
  • Cardboard
  • Straight Pins

Instructions

  1. Use the foam cutter or serrated knife to cut the cubes in half. The cubes should measure 5” tall x 5” wide x 2.5” thick. For the three taller letters, glue two half blocks stacked one on top of the other. The stacked blocks will measure 10” tall x 5” wide x 2.5” thick.
  2. Cut three 8” lengths of burlap for the taller letters and four 4” lengths of burlap for the smaller letters. Cut the stitched edges from all of the burlap pieces. Pull a few strands of burlap from all four sides of each piece to fray the edges.
  3. Choose the letter font you would like to use. Print the letters out to size onto the cardstock. The taller letters should be about 6” tall x 4” wide. The smaller letters should be about 3”x 3”. Be sure to allow a 1” border around each of the letters. This will give you enough room around the edge for stencil painting. Use the craft knife to carefully cut out the letters creating your stencil. Be careful cutting out the centers of the “B” and the “e,” as you will need to pin the centers back in place while you paint.
  4. Lay the burlap pieces onto the cardboard. Line up the stencils onto the burlap and pin the centers of the “B” and “e’s” on the cardboard. Use the stencil brush to paint the letters white and let dry. Apply a second coat if needed.
  5. Wrap all the foam blocks, life a present, with Kraft paper or recycled paper bags. Glue the burlap letters to the fronts of the blocks as shown.
  6. Embellish the gift blocks with ribbon, jute twine, and jingle bells.

 

Leave a review or ask a question