Connect with FloraCraft → Connect with FloraCraft at Facebook Connect with FloraCraft on TwitterFollow FloraCraft on PinterestFollow FloraCraft on InstagramWatch FloraCraft on YouTuber

Amaryllis Arrangement

Browe Project Categories
Designed by Make It Fun Crafts
| More

Supplies:

FloraCraft® Make It: Fun® Foam:
Cube: 8”

Other Materials:
(2) Silk Amaryllis Stems
(2) Silk Glittered Pine Branch
(2) Silk Red Berry Branch
(2) Silk Glittered Green Pom Branch
(2) Natural Branch: Painted White
12” wide Decorative Mesh: Red
2” wide Christmas Print Ribbon
(3) Buttons: Coordinating Colors

Tools:
Low-Temp Glue Gun
Scissors
Wire Cutters

Instructions

  1. Cut a 34” length of decorative mesh to wrap around the cube.  Line the bottom edge of the mesh with the bottom of the cube and fold over the excess at the top of the cube.  Secure with low-temp glue at the back of the cube.  Cut a 34” length of ribbon and wrap around the center of the cube.  Secure with glue at the back.  Glue the buttons to the front of the ribbon as shown.  Tie a small bow from the ribbon and glue it to the front right corner of the cube.
  2. Cut one amaryllis stem to about 12 – 14”.  Insert it into the center of the cube.  Cut the other amaryllis stem to about 4”.  Push this one into the cube in front of and just to the left of the first stem.
  3. Push in a red berry branch behind the amaryllis, to about the same height.  Push in a green pom branch behind the red berry branch, to about 2” taller.  Push the pine branch in behind the green poms, standing about 3” taller.
  4. Cut apart the remaining pine, pom and berry branches.  Insert into the arrangement to fill in around the amaryllis as shown.
  5. Cut apart the white branch and insert evenly throughout the arrangement.

SOURCES
FloraCraft®
(800) 253-0409
One Longfellow Place
Ludington, MI 49431
www.floracraft.com

Post a Comment

Your email is never shared. Required fields are marked *

*
*